抗裂胶
Anti-cracking glue
主要用于室内外、混凝土及墙璧纸装修及保护。
关键字:
抗裂胶
所属分类 Category:
抗裂胶
Anti-cracking glue
咨询热线 Tel:
产品详情 Description
本品引进国外先进技术,采用新型高分子聚合物,特殊工艺制造。用于建筑物内外墙面、厨卫的基层表面处理,是提高建筑涂饰工程效果不可缺少的配套产品。
产品优点:
1.水性、无毒、安全、不污染环境,不含危害到人体健康的物质甲醛、苯)2粘结度高附着力好
3.施工简便,易批刮好打磨
4.产品环保指示优于国家强制性标准GB18583-2002的要求。
施工指南:
1,表面处理:基层应坚实平整、干燥干净。吸收性强的基层如旧墙面宜先用封闭剂处理。2.直接用胶调入滑石粉重钙1.32.5#白水泥配制成合适粘度的腻子。
3.直接用胶调入腻子粉,配成合适粘度的腻子。
This product introduces foreign advanced technology, adopts new polymer, special process manufacturing. Used for the base layer surface treatment of building interior and exterior walls, kitchen and bathroom, it is an indispensable supporting product to improve the effect of building finishing engineering.
Product advantages:
1. Water-based, non-toxic, safe, non-polluting the environment, does not contain substances that endanger human health, formaldehyde, benzene) 2 High adhesion and good adhesion
3. Simple construction, easy to scrape and polish
4. The product environmental protection instructions are better than the requirements of the national mandatory standard GB18583-2002.
Construction Guide:
1. Surface treatment: the base layer should be solid and flat, dry and clean. Absorbent base layers such as old walls should be treated with a sealant first. 2. Directly mix talcum powder heavy calcium 1.32.5# white cement with glue to make putty with suitable viscosity.
3. Directly mix putty powder with glue and mix it into putty with suitable viscosity.
上一页
无
下一页